Quick - 1004C
Features:
1. Closed-loop sensor controls temperature. Zero triggering without polluting the operating voltage.
2. Adopts anti-erosion and heat resistant alloy materials; Long life time; Suitable for lead free applications.
|
|
Specifications:
Max Power Consumption: 200W
Voltage: 110V / 220V
Temperature Range: 150 - 500°C
Temperature Stability: ±2°C
Solder pot: Titanium Alloy
Solder pot Dimensions: Φ36 * 40(H)mm
Weight: About 860g
Total Dimensions: 91(L) * 150(W) * 75(H)mm
|
Features:
1. Large power; Sensor closer to tip; Micro computer digital; PID temperature control; Fast heating and rapid thermal recovery; Suitable for lead free soldering.
2. Switch power supply, it protects the unit from being damaged, such as shot circuit protection, overheating protection, overpowering. Power output will not vary with the change of voltage fluctuation.
3. Password locks temperature. Auto sleeping and auto shut-off available, auto sleeping time and auto shut-off time can be set.
4. Range of temperature limits can be set according to the needs; If temperature exceeds the limit set by the operator, the unit sounds the alarm.
5. Calibrate temperature digitally and easily.
6. ESD Safe by design.
7. New housing; light weight.
8. Various types of tips available. Easy to use.
Specifications:
Power Consumption: 90W
Output Voltage: DC 48V 400K Hz
Temperature Range: 80°C - 480°C
Auto sleeping Time: 0-99 min(adjustable)
Shut-off Time: 0-99 min(adjustable)
Range of Sleeping Temp: 50°C - 250°C
Max Ambient Temperature: 40°C
Temperature Stability: ±2°C(stationary air, no load)
Dimensions: 155(L) * 78(W) * 120(H)mm
Weight(no power cord): About 1.0kg
Soldering Iron:
Power Consumption: DC48V 80W
Tip to Ground Resistance: <2Ω
Tip to Ground Potential: <2mV
Heating element: Electromagnetic element
Handle Length(no power cord): 180mm
Weight: 120g
Features:
1. Remove noxious fumes quickly, safely and efficiently.
2. Angle can be adjusted at will and easy to place and move, low noise and long service life fan.
3. The replaceable filter is made by joining a special urethane foam with refined, activated high absorption carbon.
4. Regular and ESD safe two types.
Specifications:
Power Consumption: 20W(60Hz) 23W(50Hz)
Absorption Capacity: About 0.93/1.07 m³/min
Outer Dimensions: 167(L) * 101(W) * 182(H)mm
Weight: About 1.5 kg
Accessories: Filter(3PCS)
Features:
1. Integrative structure design. Easy installation; Agile movement, no need to lay any pipelines.
2. Large-power brushless DC fan generates large air flow.
3. Low noise.
4. Tripple-filter design; Remove hazardous substances from fume to ensure body safety. Pre-filter and main filter can be replaced separately, thus using filter to the largest extent and cut down cost.
5. Built-in air cycling filtering system aviods discharging the cool/hot air to the outside.
6. Two-in-one design; Air flow and arms both adjustable.
Specifications:
Stationary Pressure: 900 Pa
Air Flow: 320m³/h
System Flow(including filter mechanism): 2*100m³/h
Filtering Effeciency: 0.3µm 99.97%
Wattage: 120Watt
Noise: less than 55dB
Arm Length: 2 * 1.5 meter
Operating Voltage: 220V AC
Dimensions: 470(L)*230(W)*500(H)mm
Qty of Arms: 2 pcs
Features:
1. Brushless fan with long life time, suitable for reworking in cleanrooms.
2. Low noise, soft airflow, even temperature is suitable for lead free soldering and desoldering.
3. Intelligent design, rapid heating while working. It begins to cool down to 100 automatically and shut off itself after the handle is placed on the holder.
4. Various types of nozzles available, easy to replace.
5. ESD Safe by design.
6. Particularly suitable for desoldering sensitive components and for soft air work.
Specifications:
Rated Output: 700W
Temperature Range: 100°C - 450°C
Air Volume: 120L/min
Noise: ≤45dB
Features:
1. At most 64 units can be connected to one computer for group management.
2. Sensor closer to the tip; Rapid thermal recovery.
3. Calibrate temperature digitally and easily.
4. Large LCD design displaying two temperatures.
5. New appearance; Take up little space.
6. Range of temperature limits can be set according to the needs; If temperature exceeds the limit, the unit sounds alarm.
7. Auto-sleeping time and shut-off time can be set.
8. Password locks temperature.
9. Safe and reliable grounding method to avoid changes of tip-to-ground resistance and tip-to-ground potential during soldering process.
10. Separate design of heater and soldering tips; Save cost of replacing spare parts.
11. ESD Safe by design.
Specifications:
Power Consumption: 90W
Output Voltage: AC 36V 400K Hz
Temperature Range: Select according to working modes
Max Ambient Temperature: 40°C
Temperature Stability: ±2°C(stationary air, no load)
Connection Manner: Rs485
Max quantity of the unit connecting to PC: ≤64 units
Tip to Ground Resistance: <2Ω
Tip to Ground Potential: <2mV
Heating element: Electromagnetic element
Dimensions: Φ120*150(H)mm
Weight(no power cord): About 2.1kg
