|
Standard Sharpened Powered Cold Knife Blades
These blades are made of hardened carbon steel and are bent the same way a regular cold knife
blade is bent. They cut urethane by thrusting forward into the urethane and backwards away
from the urethane as you pull the oscillating tool forward. These blades will fit the Falcon,
Raven, and TimeSaver tools as well as most oscillating tools on the market. Will not fit the
Ninja™ line of tools.
51847 . 3/4" Long
51848 . 1" Long
51849 . 1-1/2" Long
51850 |
51851 |
51852 |
|
|
|
51853 |
51854 |
51855 |
|
|
|
51859 |
|
|
|
|
|
Equalizer® Talon™ Oscillating Blades
These high-quality blades are made of flexible stainless steel, so they will flex before they break. This ability acts as a warning. When you see the blade start to flex, you know it is time to back-off and decrease the amount of pressure. The blades are flat on one side so they will ride against the glass and cut the urethane at the point of least resistance. These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools on the market. Will not fit the Ninja™ line of tools.
51850 . Pinchweld scraper, 1/2" wide
51851 . Offset cutting blade, cutting part 2-1/8"
51852 . Straight cutting blade, cutting part 1-1/8"
51853 . Curved offset cutting blade, cutting part 2-1/8"
51854 . Straight offset cutting blade, cutting part 3-1/2"
51855 . Hooked blade, cutting part 3/4"
51859 . Hooked blade, cutting part 3-1/2"
|
