ELECTRIC TOOLS > DIAMOND > PORTABLE REBAR BENDERS



Rebar Bender Model DBD-16L


Extension working table(standard accessory)
This small unit may be carried in one hand but has all the attributes of its bigger brethren and can make a 180 dgrees bend of a 16mm rebar in just 1.5 seconds.
Rebar Bender Model DBD19L

Roller kit (standard accessory.
For rebars of up to 20mm, the DBD-19L is similarly treasured. May we also suggest optional foot pedal and stand..
Model Max.rebar diameter Bending speed Max.tensile strength Bending angle(degrees) Power supply Voltage Power Input Weight Dimensions
(mm)
DBD-16L 16mm (5/8") 180 degrees/
1.5sec		 490N/mm² Up to 180 Electric motor 100V/
115V/
230V		 1050W 20 kg 320x
350x
245
DBD-19L 20mm (3/4") 180 degrees/
5 sec 		490N/mm² Up to 180 Electric motor 100V/
115V/
230V		 1050W 40.8 kg 320x
425x
415

Rebar Bender Model DBD-25X
-OPTION-

Stand
Rebar Bender Model DBD-25L
-OPTION-

Foot pedal
Both the DBD-25X and the smaller, lighter DBD-25L are prized field models because of their proven durability and ability to bend 25mm rebars. This strong electrical-mechanical bender has two presets angle locks for repeating the same angle bends. Optional foot pedal and stand are available for all DBD series.
Model Max.rebar diameter Bending speed Max.tensile strength Bending angle(degrees) Power supply Voltage Power Input Weight Dimensions
(mm)
DBD-25L 25mm (1") 180 degrees/7 sec 490N/mm² Up to 180 Electric motor 100V/
115V/
230V		 1700W 61 kg 462x
320x
415
DBD-25X 25mm (1") 180 degrees/6 sec 560N/mm² Up to 180 Electric motor 100V/
115V/
230V		 1330W 86 kg 490x
550x
440

Rebar Bender Model DBD-25H


Fast and accurate bendhing.
Our latest table-type bender is a heavy-duty model for rebars of up to 25mm 620N/mm2 tensile strength. It comes fully equipped with a set of nine bending rollers in a steel carrying case.
Rebar Bender Model DBD-32X


Features counter and ammeter.
The largest single-phase bender. The lever-type angle selector can be set to accurately bend any angle from 0 - 180 degrees. (DBD-32X, 25H and 25X)
Model Max.rebar diameter Bending speed Max.tensile strength Bending angle
(degrees)		 Power supply Voltage Power Input Weight Dimensions
(mm)
DBD-25H 25mm (1") 180 degrees/
9 sec		 620N/mm² Up to 180 Electric motor 100V/
115V/
230V		 1330W 96.5 kg 540x
580x
440
DBD-32X 25mm (1") 180 degrees/
8 sec		 560N/mm² Up to 180 Electric motor 100V/
115V/
230V		 1500W 180 kg 590x
620x
480

HandyBender Model HB-16W

Bending rebar up to 16mm 490N/mm²(T.S) from 0-135 degrees in-place at the job site.
-Option-

 The optional 90 degree bennding die and collar make it simple to repeat 90 degrees bends without a guide.
The electro-hydraulic hand-held bender for use where table-type machines cannot go. An optional bending die and shoe cover (collar) are available for larger radius bends.
Model Max.rebar diameter Bending speed Max.tensile strength Bending angle
(degrees)		 Power supply Voltage Power Input Weight Dimensions
(mm)
HB-16W 16mm (5/8") 135 degrees/8 sec 490N/mm² Up to 135 Electric motor 100V/
115V/
230V		 1050W 15 kg 585x
195x
205


Pull
Push
Push
A dual-purpase tool that cleanly straightens bent rebars and functions as a simple bender. Accepts any 490N/mm2 tensils strength rebar up to 32mm.
Rebar diameter Straightening capacity(degrees) Bending capacity(degrees)
Push Pull Push Pull
13mm(1/2") up to 125 up to 121 up to 94 up to 92
16mm(5/8") 128 124 90 90
20mm(3/4") 130 126 90 90
25mm(12) 132 124 90 90
29mm(1 1/8") 140 135 90 90
32mm(1 1/4") 144 138 90 90
-Option-
 Large radius bending hook
Model Max.rebar diameter Bending speed Max.tensile strength Bending angle
(degrees)		 Power supply Voltage Power Input Weight

Dimensions
(mm)
DBR-32WH 32mm (1 1/4") 90 degrees/4 sec 490N/mm² Up to 144 Electric motor 100V/
115V/
230V		 1050W 26 kg 660x
270x
200